Abstract and Full paper on ELECTRIC PULSE MAGNETIC BRAKING USING MECHATRONICS - creativeworld9

728x90 AdSpace

Trending
Monday, October 3, 2011

Abstract and Full paper on ELECTRIC PULSE MAGNETIC BRAKING USING MECHATRONICS

 ELECTRIC PULSE MAGNETIC BRAKING
USING MECHATRONICS

ABSTRACT      :

            Mechatronics is a hybrid technological field which evolved from the combination of mechanical, electronics & Software engineering. Automobiles need high degree of safety to protect the occupants and their property. Bearing this in senses we come up with a new concept of Electric pulse Magnetic Braking (E.P.M.Braking).

            When the driver applies force on the brake pedal the magnitude is sensed by the pressure transducer which in turn sends the actuating signals to microprocessor. This intelligent device sends pulsating D.C. current from the capacitor to the power pack.

            The power pack develops sufficient torque to decelerate or stop the vehicle as per the driver’s requirement. The torque produced is directly proportional to the force applied on the brake pedal, as the intensity of the actuating signal from the pressure transducer is directly proportional to the pulsating D.C. current supplied to the power pack. 

            Another important aspect of this braking system is that the power pack also acts as a generator, which results in additional power generation. We have also incorporated artificial intelligence. Logic gates for backup-circuit for safety and shift current for shifting the power pack from generating mode to braking mode and vice-versa to generator power.

The scope of E.P.M. braking system is very high due to the following reasons:
v HIGHEFFECIENCY
v ROLLING STOP
v INSTANT STOP
v ADDITIONAL POWER GENERATION
v NO WEAR AND TEAR
v HIGH DEGREE OF SAFTEY
            In our universe nothing is permanent; the only permanent aspect is technology. In our machine oriented world no particular field can strive on its own, so merging of all the major technological sciences becomes inevitable to cater needs of the Human Race. A field thus evolved is MECHATRONICS’.

WHAT IS MECHATRONICS?
            Mechatronics is concerned with the blending of mechanical electronics & software fields. So the mechanical system, motor heads and gigabytes go hand in hand. As the saying goes Necessity is the mother of invention, locomotion was first on feet, animals, then by wagons powered by horses, then horses were replaced by horse power produced by the engines which went at roaring speeds, their safety was a big concern, so the stoppers namely the brakes were developed for the safety of the occupants and the vehicles.
            Brakes are one of the most important control components of the vehicle. They are required to stop the vehicles at the smallest distance and this is achieved by converting the kinetic energy of the wheels into heat energy, which is dissipated into the atmosphere.

To provide a cutting edge upon the conventional braking systems, we have come up with a new concept of E.P.M.Braking. This will result in high safety standard which will minimize the damage to life and property.  

The main parts of E.P.M.Braking system are:
v POWER PACK
v MICROPROCESSOR
v PRESSURE TRANSDUCER
v CAPACITOR
v D.C. POWER SUPPLY
v LOGIC CIRCUITS

POWER PACK:

                     This unit is specially designed for E.P.M.Braking. This consists of armature wiring on the dead and live axle, surrounded by permanent magnet made of samarium cobalt with desired air gap. The armature is wound round with room temperature super conducting materials like carbon fibers and its composites. The whole setup is placed inside the casing. Sensors are placed inside the casing to sense the braking action. Power pack is incorporated with shift circuit for conversion of system from braking mode to generating mode or vice versa.

MICROPROCESSOR:

            This being the heart of the E.P.M.Braking transmits a pulsating D.C. supply to armature, which is directly proportional to the intensity of signals from the pressure transducer via brake pedal. This also monitors the RPM and the rotation of the wheels. Microprocessor controls the mode of operation of the power pack.

PRESSURE TRANSDUCER:

            This is a piezo-electric crystal. When the force is applied on the pressure transducer via brake pedal, this sends actuating signals from the pressure transducer which is directly proportional to the force applied on the brake pedal.

POWER PACK
FUCTONAL OUTLOOK:

            When the vehicle is moving at a desired velocity, if there is any interference in the path there arises the need for braking, while braking the wheels, should not skid as the driver looses the control of the vehicle. A good braking system should have a rolling stop, so that the driver can handle vehicle easily. When the driver applies force on the brake pedal, which is in contact with the pressure transducer or the piezo-electric crystal, it sends actuating signals to the microprocessor, which shifts the power pack from generator mode to braking mode.
            The microprocessor is programmed in such a way that the frequency of constant D.C. pulse discharged from the capacitor is directly proportional to the intensity of   actuating signals from the pressure transducer. This pulsating D.C. is send to the armature of the power pack, which is fitted to both the axles. This is sensed by the microprocessor through the sensors. The torque is sufficient to bring the vehicle to a rolling stop within a short distance since we apply only pulsating D.C., there is neither sliding nor skidding of the wheels.
When the vehicle is operated in the reverse gear the sensors in the power pack senses the direction and communicates to the microprocessor, so that the pulsating D.C. supplied to the armature is in the reverse direction. Another important aspect of this braking system is that the power pack also acts as a generator. When there are no actuating signals from the pressure transducer the logic circuit shifts the power pack from the braking mode to the generator mode. The power produced by the generator mode is fed to D.C. power source.

SHIFTING LOGIC:
            When the power pack is operating in the generator mode power is produced. After crossing the critical speed, to prevent the over loading of the engine is in the uphill condition, we have designed a simple logic circuit, which consists of a zener diode, XOR-GATE, NOT-GATE, power transistor and current limiting resistors.

Block Diagram

Logical Circuit 

When the velocity of the vehicle increases, power produced also increases. The power produced is fed to a zener diode through a current limiting resistor R1. when the voltage from the power pack exceeds the critical voltage of the zener diode , it overcomes the brake down voltage and the A.D.C.(Analog to Digital Converter) sends a signal to the X-OR gate to pin1. Pin2 of this gate is connected to the pressure transducer through a A.D.C. When there is no braking there is no signal to pin2. As the logic of X-OR gate when the input is ‘1’ and ‘0’ the output is ‘1’, this is fed to a NOT gate which gives an output of ‘0’. The power transducer receives the signal and it is triggered to connect the power pack to the battery for charging. If the brakes are applied pin2 of the x-OR gate receives signal from pressure transducer hence the output of X-OR gate is ‘0’ and NOT gate output is ‘1’, this closes the transistor circuit and it shifts the power pack from generator mode to braking mode. 


SAFETY BACKUP:
            In the case, if the microprocessor fails, the output from the microprocessor is ‘0’, this signal ‘0’ is send to the pin3 of X-OR gate. Pin4 of the X-OR gate receives signal’1’ from the pressure transducer and the output of the X-OR gate is ‘1’, this triggers the micro controller to discharge the current from the capacitor to the power pack. This is only a constant D.C. supply not a pulsating one. This brings the vehicle to a sudden stop.

INCORPORATION OF ARTIFICIAL INTELLIGENCE:

            A C.C.D.(charged couple device) camera captures the image of the surface in which the vehicle is moving. The image is in the form of pixels. A matrix of pixels is taken and the resultant brightness is found out. Similarly the resultant for all the matrix of pixels is obtained. Using a comparator circuit the resultant is matched with the resultant of template images, which are already stored in memory.
Process & Graphs
Classification of the images and training of the comparator is taken care by A.N.N. (Artificial Neural Networks). With the help of V.C.O (Voltage Control Oscillator) the signals are feed into the main circuit i.e. the voltage signals are converted into frequency depending upon the intensity of actuating signals from the pressure transducer and also from the V.C.O. the square wave pattern is generated. If we want a vehicle to come to a sudden stop the lag time of square wave is reduced. While deceleration the lag time is increased as per the rate of deceleration.    

HIGHLIGHTS OF E.P.M. BRAKING SYSTEM:
v High efficiency
v Rolling stop
v High degree of safety
v No wear and tear
v Very high response
v Additional power generation
CONCLUSION:
            The above ideas may seem to be impossible; not in mere future considering the safety of the passengers this method of braking system plays an important role. By incorporating this type of braking system there is no need of extra arrangement. The wear and tear of the brake system and the tyre is less. Apart from this advantage there is generation of additional power for the source. This also increases the efficiency of the engine.
Abstract and Full paper on ELECTRIC PULSE MAGNETIC BRAKING USING MECHATRONICS Reviewed by creativeworld9 on 11:16 PM Rating: 5   ELECTRIC PULSE MAGNETIC BRAKING USING MECHATRONICS ABSTRACT      :             Mechatronics is a hybrid technologica...

39 comments:

  1. Replies
    1. FINANCIAL BREAKTHROUGH

      Life indeed is GRACE, I'am Daan Sophia currently in California USA. I would like to share my experience with you guys on how I got a loan of $185,000.00 USD to clear my bank draft and start up a new business. It all started when i lost my home and belongings due to the bank draft I took to offset some bills and some personal needs. I became so desperate and began to seek for funds at all means. Luckily for me I heard a colleague of mine talking about this company, I got interested although i was scared of being scammed, I was compelled by my situation and had no choice than to seek advise from my friend regarding this very company and was given their contact number, getting intouch with them really made me skeptical due to my past experience with online lenders, little did i know this very Company "PROGRESSIVE LOAN INC. was a godsent to me and my family and the entire Internet World, this company has been of great help to me and some of my colleague and today am a proud owner of well organized business and responsibilities are well handled all thanks to Josef Lewis of (progresiveloan@yahoo.com).. So if really you are genuinely in need of a loan either to expand or start up your own business or in any form of financial difficulty, i advise you give Mr Josef Lewis of Progressive loan the opportunity of financial upliftment in your life Email: progresiveloan@yahoo.com OR Call/Text +1(603) 786-7565 and not fall victim of online scam in the name of getting a loan. thanks



      Delete
  2. I am always searching like this type blog post. I hope I will see again..
    * stick war games

    ReplyDelete
  3. Mechatronics is concerned with the blending of mechanical electronics & software fields. So the mechanical system, motor heads and gigabytes go hand in hand.
    spanish to english

    ReplyDelete
  4. Looks like the writer has put a lot of hard work into this.
    check my site

    ReplyDelete
  5. What a fantabulous post this has been. Never seen this kind of useful post. I am grateful to you and expect more number of posts like these. Thank you very much. website PressureWasherGuides.com

    ReplyDelete
  6. That's what makes you the best. You should keep publishing more articles and you will Such Become One of the best writers ever Solar panel

    ReplyDelete
  7. During this website, you will see this shape, i highly recommend you learn this review. unlocked phones

    ReplyDelete
  8. Thanks for sharing great information. I like your blog and highly recommendData Science Training in Hyderabad

    ReplyDelete
  9. Attend The Data Scientist Courses From ExcelR. Practical Data Scientist Courses Sessions With Assured Placement Support From Experienced Faculty. ExcelR Offers The Data Scientist Courses. Data Scientist Courses

    ReplyDelete
  10. I recently came across your article and have been reading along. I want to express my admiration of your writing skill and ability to make readers read from the beginning to the end. I would like to read newer posts and to share my thoughts with you.
    data science training

    ReplyDelete
  11. Green energy is nothing but the power used is not only to be efficient but also should be environmental friendly. It is a renewable energy and do not cause any pollution to the environment. There are few varieties of green energies available those are wind power, geothermal power, anaerobic energy, small scale hydro power, biomass power, wave power and solar power. Surprisingly one can see source of energy from waste incineration too. איך מפיקים חשמל

    ReplyDelete
  12. Actually I read it yesterday but I had some thoughts about it and today I wanted to read it again because it is very well written. view it

    ReplyDelete
  13. I wanted to thank you for this great read!! I definitely enjoying every little bit of it I have you bookmarked to check out new stuff you post. best magnetic rowing machines

    ReplyDelete
  14. This is such a great resource that you are providing and you give it away for free. I love seeing blog that understand the value of providing a quality resource for free. digital inverter generator

    ReplyDelete
  15. PCB is required for the mechanical support of any type of electronics product. This is in the form of a card or a board which is made up of thin metal or hard plastic commonly known as the insulator. PCB assembly

    ReplyDelete
  16. In the wake of perusing your article, I was astounded. I realize that you clarify it well overall. What's more, I trust that different perusers will likewise encounter how I feel in the wake of perusing your article.
    data analytics course in hyderabad

    ReplyDelete
  17. Nice blog and informative content. I am impressed a lot with your blog. Keep up your work in further blogs.
    AI Patasala Data Science Courses

    ReplyDelete
  18. This content is simply exciting and creative. I have been deciding on a institutional move and this has helped me with one aspect. Printed Circuit Board

    ReplyDelete
  19. Thus, when at a later point of time, if you decide to sell off your house, then you will be getting a handsome amount. The only reason being you have kept your house safe. Even if there be problems with electrical devices in your house, EICR Torquay

    ReplyDelete
  20. With such a strong impact in the state lawmaking body the WSPA has declined how much cash it has put resources into the mission against the electric vehicle orders, for example, the Zero Emissions Mandate by the CARB and the CETC. capacitores de cerâmica de alta tensão

    ReplyDelete
  21. You really want to utilize an alternate button or dial to gauge for dc or ac test voltage. Not utilizing the right one can prompt a wrong estimation.
    عالية الجهد مكثف السيراميك

    ReplyDelete
  22. Wind energy is cordial to the general climate, as no petroleum derivatives are scorched to produce electricity from wind energy. lighting

    ReplyDelete
  23. Research (b) has viewed that as 46% of regular bikes are utilized just a single time or two times per week, with a further 30% being utilized once a fortnight or even less. 750 Watt E-bike

    ReplyDelete
  24. "Thanks to the electrician, my outdoor patio now has a well-designed lighting scheme that sets the mood for gatherings." lighting

    ReplyDelete
  25. They are knowledgeable about different types of cables and wiring methods and select the appropriate ones for each installation. Electrical Inspection

    ReplyDelete
  26. I've seen some incredible holiday light shows on YouTube. Holiday Lighting Installation

    ReplyDelete